Replacement EPROM Determination and Programming: Overview

The information provided in this attachment is to serve as a guide/reference when using MoDic programming software version 5.1 or higher (refer to section 15 of your IDC binder for the latest software information), whenever a DME EPROM or control module is to be replaced and programmed.

For easy reference, this procedure has been broken up into the following:

A. Explanation of the determine process.
1) Automatic determination
2) Manual Determination
3) Determination procedure considerations

*** B. M50 (Non-VANOS) DME EPROM Replacement and Programming Troubleshooting Procedure

*** C. Programming Hints.

*** D. Exchange EPROM - Determination and programming of a replacement EPROM (Flow Chart) using the MoDic.

*** E. Engine Control Module EPROM Replacement. ***