Defect Code 15

Defect Code 15:

*D* Defect code memory: 15 Control unit reset:

Explanation: Control unit has performed a reset.

Possible cause: Battery was disconnected: Voltage supply of DWA control unit faulty: Internal defect in control unit.

Troubleshooting: Clear defect code memory and read out defect code memory once again after approx. 30 seconds. If the defect code 15 is not stored further troubleshooting is not required since there is no defect. If the detect code is stored again and the voltage supply of the control unit is OK, defect code "15"indicates an internal defect in the control unit and the control unit must be replaced.