Crankshaft Main Bearing
Main Bearing Caps10 mm Bolts [1][2]
Step #1 20 Nm (14.75 ft lb)
Step #2 Torque Angle 70°
11 mm Bolts [1][2]
Step #1 20 Nm (14.75 ft lb)
Step #2 Torque Angle 100°
8 mm Inclined Bolts [3]
Step #1 20 Nm (14.75 ft lb)
Step #2 Torque Angle 45°
Threaded Support Sleeve 10 Nm (7.38 ft lb)
[1] Replace bolts.
[2] Do not wash coating off bolts.
[3] Replace hex and collar bolts and spacer pin.