Code 13 (Interior Temperature Sensor)

^D^ Defect code memory: 13 Interior temperature sensor

Explanation:
This defect code is stored when there is a short to ground, to positive, or a break at the black connector, Pin 3.

Effect of defect:
If the defect is a current defect, a substitute value of 24°C (75°F) is used.

Possible cause:
Voltage supply not OK, wire or interior temperature sensor defective.

Troubleshooting:
Check voltage supply (approximately 5V with sensor disconnected) as well as wires and repair if necessary, or renew component.