Code 61 (Mixing Air Flap Motor)

^D^ Defect code memory: 61 Mixing flap motor

Explanation:
This defect code is stored when there is a short to ground, to positive, or a break at the blue connector, Pin 23, 24, 25, or 26.

Effect of defect:
If the defect is a current defect, the component is no longer activated.

Possible cause:
Voltage supply not OK, wire or mixing flap motor defective.

Troubleshooting:
Check voltage supply (approximately 12V) as well as wires and repair if necessary, or renew component.