Code 07 (Evaporator sensor)

^D^ Defect code memory: 07 Evaporator sensor

Explanation:
This defect code is stored when there is a short to ground, to positive, or a break at the white connector, Pin 5.

Effect of defect:
If the defect is a current defect, a substitute value of -4°C (24°F) is used.

Possible cause:
Voltage supply not OK, wire or evaporator sensor defective.

Troubleshooting:
Check voltage supply (approximately 5V with sensor disconnected) as well as wires and repair if necessary, or renew component.