Computers and Control Systems: Technical Service Bulletins

• Computers, Controls - Programming VS Veh. Data Status
• Compuetrs/Controls - Recommended Diagnostic Procedures
• Computers - ISTA Diagnosis On Vehicles Prior To E46
• Computers/Control - Loading/Activation Of Enabling Codes
• Updated MoDic(R) Diagnostic Software - D12.0
• Updated MoDic(R) Software - P11.0 Programming
  • Overview
  • Program Highlights
  • Flash Programming Features
  • Programming the Control Module
    • Overview
    • 1. Determine Customer Service Measures
    • 2. Exchange Control Module
    • 3. Exchange EPROM
    • 4. Adjustment EWS - DME Vehicles From 1/95
    • 5. Clear Adaptation Values
  • Diskette Contents
  • How to Load V11.0 Software With MODIC Station
  • Label Printing
  • Prerequisites For Programming
  • Parts Information
• MoDic(R) - Loss of Program
• Speicial Tools - Test Cables
• New Special Tools - Adapter Cables
• Tools - New 88 Pin Universal Adapter
• MoDic(R) - Has Become A Mandatory Tool
• Service Tester - Revised and Expanded Software
  • Overview
  • Important Program Additions
  • Fundamental Structure of the Diagnostic Program
  • Control Unit Survey
  • Control Unit Identification
  • 1 = Read Fault Memory
  • 2 = Status Requests
  • 3 = Activate Components
  • 4 = Test Sequence - Example From Instrument Cluster
  • 5 = Special Functions - Example From Instrument Cluster
  • 6 = Output Test Code
  • 9 = Clear Fault Memory
• ECM - EPROM Replacement/Application Chart
• Undefined MoDic(R) Software
  • Overview
  • How to Load C7.0 Software With the MODIC Station
• Updated MoDic(R) Software - P8.0 Programming
  • Overview
  • Engine Control Module Flash Programming Features
  • Programming the Control Module
    • Overview
    • 2. "Exchange Control Module"
    • 3. "Exchange EPROM"
    • 4. "Adjustment EWS - DME Vehicles From 1/95"
    • 5. "Clear Adaptation Values"
  • How to Load V8.0 Software With the Modic Station
  • Label Printing
  • Prerequisites For Programming
• Updated MoDic(R) Software - C9.0 ZCS Coding
  • Overview
  • How to Load C9.0 Software With the MODIC Station
  • Label Printing
• Updated MoDic(R) Software - P9.0 Programming
  • Overview
  • Flash Programming Features
  • Programming the Control Module
    • Overview
    • 1. "Determine Customer Service Measures"
    • 2. "Exchange Control Module"
    • 3. "Exchange EPROM"
    • 4. "Adjustment EWS - DME Vehicles From 1/95
    • 5. "Clear Adaptation Values"
  • How to Load V9.0 Software With the MODIC Station
  • Label Printing
  • Prerequisites For Programming
• TIS - Software Update 12/96
  • Overview
  • TIS Loading Instructions For DIS Tester
  • TIS Loading Instructions For EPC/TIS Server
  • Proper Care of CDs
    • Overview
    • CD Return Procedure
• New Special Tool - MoDic(R) Replacement Cable
• Electrical/Electronic Systems - Troubleshooting Hints
  • Overview
  • Verify the Complaint and Verify the Complaint Is A Malfunction
  • Systematic Troubleshooting
  • Inputs, Processing, and Outputs
  • Common Sense Hints
• Emissions - On-Board Diagnostic Code Updated List
• ECM - Codes and Hardware Numbers
• EPROM - Replacement/Application Chart Order Form
• Special Tools - Simulator Tool For Bosch Oxygen Sensors
  • Overview
  • Individual Parts of the Simulator
  • Operator Control/ Panel of Simulator
  • Connecting the Simulator
  • Test 1: Oxygen Sensor Testing
  • Test 2: Oxygen Sensor Voltage
  • Test 3: Simulation of Probe Voltage
• Tools - Seal Pliers For Speedometer Sender