C. Programming Hints
*** C: PROGRAMMING HINTSIf you follow the steps for an automatic determination and the MoDiC display states "No substitute EPROM found for this control unit!", compare the BMW label, located on the cover of the DME control module with those shown below and follow the directions indicated:
Figure A - Follow the steps for a manual determination in the flowchart and enter the part numbers that appear on the label.
Figure B - Follow the steps for a manual determination in the flow chart. A proper determination can be obtained by entering the information provided based on model and the Bosch Hardware Number installed:
Note:
The part numbers for a basic (programmable) and a programmed control module can also be obtained from the DME identification screen as the "BMW Hardware Number" and the "Part Number." ***