Defect Code Table

Defect Code Table:

*D* Defect code memory - stored defect codes:

One or several defect codes stored pr Troubleshooting in accordance with BMW DIAGNOSTIC SYSTEM

Displaying a stored defect code on the screen:

- Defect location: The defect may be in the component on the associated wires or in the control unit.

- Defect frequency: This shows how often the defect has occurred (defect code counter).

- Type of defect: Interruptions in the power circuit of the defect location are indicated.

- Current defect: The display shows "defect current" or "defect not current". The display "defect current' does not indicate whether, for example the low beam power circuit is interrupted on the left or right. The display "defect current" only shows that one of the low beam power circuits is interrupted.

- Defect explanation: This screen page can be accessed with *(down arrow)* from the "defect" screen page. These screen pages indicate the conditions under which the defect code is stored, when the power circuit is monitored and whether a corresponding message is displayed in the MID.