DIS tester Software - Update: Overview
BULLETIN #: IDC 002/95-6DATE: April 1995
SECTION: 6
SYSTEM: DIS
VERSION: 3.0
MODEL: ALL
CONTROL MODULE: ALL
SUBJECT:
Updated DIS Software
SITUATION:
New updated software is flow available for the DIS Tester. This IDC supersedes DC 002/956 dated October 1994 which should be removed from your binder and discarded.
PROGRAM HIGHLIGHTS
^ Operational programs for V3.0 (DIS only) include:
1. E38 Diagnosis programs, schematics, installation locations, functional descriptions, pin assignments, connector views.
2. Version 15 Diagnostics for E30, E31, E32, E34 and E36.
3. Version 12.0 coding software for coding of control units that use the Central Coding Code (ZCS). For Series E31, E32 as of 10/91, E34 as of 10/91, E36 and E38.
^ Operation programs for MoDiC download include:
1. Version 12.0 coding. This program uses the same parameters as V12 DIS coding.
2. Version 1.0 coding code. Coding of control modules with individual codes. For Series E32 and E34 from 9/90 to 10/91.
3. Version 5.0 programming. DO NOT USE THIS PROGRAM. In its place use V5.1 programming (P/N 01 11 9 789 121. Refer to IDC 1014/95-6 for complete details. Do not attempt to load this program with the DIS. Loading should only be done with the MoDiC station.
4. Version 14.1 Diagnostics for Series E30, E31, E32, E34 and E36.
NOTE
Please be advised of the error described. This error will be present in both DIS and MoDiC V12.0 coding software.
^ Updated information for all models.
^ New diagnostic program for EWS (Electronic Immobilization System).
PARTS INFORMATION
DIS Software V3.0
P/N 01 57 9 788 617
Price = Free of Charge to DIS Users
A complete set of V3.0 DIS software will be sent to all BMW dealers via the BMW Automatic Tool Shipment Program.