Crankshaft Position Sensor: Service and Repair

REMOVE AND INSTALL
- Switch "Off" ignition.
- Disconnect plug connections on cable duct.
1 = Sensor for cylinder recognition (camshaft sensor)
2 = Impulse sensor on vibration damper (crankshaft sensor)




- Unfasten screw on impulse sensor.
- Unfasten screw on cable guide.
- Remove sensor
- Reinstall sensor in reverse order. Torque bolt to 8 Ft. Lbs.

NOTE: Clip electric wire in the guide securely to prevent the wire from rubbing on the drive belt.