Compressor HVAC: Service and Repair

A/C COMPRESSOR, REPLACING

1. Following the manufacturer's instructions, connect an approved refrigerant recovery/recycling/recharging unit to the A/C system and discharge system.

WARNING: Do not discharge/charge the A/C system without proper equipment and training, damage to the vehicle and personal injury may result. Read warnings and cautions given under A/C system, warnings and cautions.

2. Disconnect negative (-) battery terminal.

3. Remove engine splash guard from under engine.

4. Remove drive belt from A/C compressor.




5. Disconnect suction (B) and pressure hose (A) and set aside. Discard O-rings.




6. Disconnect electrical connector, and remove A/C compressor mounting bolts(arrows).

7. Remove compressor.

8. Installation is reverse of removal. Replace O-rings at pressure fittings.

CAUTION: Do not re-use O-rings when reconnecting refrigerant lines. Always replace O-rings.

9. Before recharging, evacuate system for at least 30 min. Recharge system following the equipment manufacturer's instructions.