Defect Code 07

Defect Code 07:

Failure of Tank Indicator Lamp:

Possible cause: Lamp, wire, reserve contact in immersion tube sending unit

Note: The indicator lamp is electronically damped. The indication, however, is not damped in the instrument cluster *D* Status displays.

Troubleshooting:

1. If the fuel gauge is also defective, continue with defect code 15,
2. Check the lamp with *D* System test. Replace defective lamp.
3. If lamp OK, connect wire from immersion tube sending unit (Pin 2) to instrument cluster directly to ground. Is the reserve contact indicated as ON in *D* Instrument cluster status displays? If no: Repair wire. If yes: Replace immersion tube sending unit.