Fuel Pump: Service and Repair

Fuel Pump Location:

REMOVE AND INSTALL
1. Lift out the trunk insulation.
2. Remove the fuel pump cover plate screws and the cover plate.

Supply And Return Lines:

3. Mark the fuel lines and hoses for identification and remove.
4. Pull the slide on the electrical connector to one side and remove the connector.
5. Remove the fuel level sending unit retaining screws.

NOTE: If necessary, draw off some fuel with a scavenging pump.

In Tank Fuel Pumps:

6. Carefully remove the fuel level sender and lay it aside.
7. Compress the safety hooks on the fuel pump holder and pull out the pumps.
8. Remove the electrical connectors and fuel hoses and pull the pump out of the fuel pump console.
9. Remove the filter screen retaining screw and lift of the filter.
10. With a new seal reinstall in the reverse manner.