R & R Control Module (Diagnosis Unit)

WARNING: Review Service Precautions. Improper handling could cause activation of the airbag(s) and lead to injuries!

REMOVE
- Disconnect battery and cover negative pole or terminal.
- A waiting period of approximately 5 minutes should be observed before beginning electrical work to allow the capacitor charge to dissipate.





- Remove lower steering column casing section.
- Disconnect plug connection for airbag (orange).

Control Unit R&R:

- Remove trim panel for dashboard at bottom right.

Control Unit R&R:

- Disconnect (orange) plugs (1).
- Unscrew screws.
- Remove control module (2).

INSTALL
- Install in reverse order.

NOTE: Arrow on module faces forward.

- Check for possible trouble codes.
- Verify proper system operation.