Defect Code 3

*D* Defect code memory: 3 Gong T1

Explanation:
This defect code is stored when malfunctions occur in the area of the gong.

Possible cause:
Gong defective; wire from BC to gong defective.

Troubleshooting:
Check wire and repair if necessary (from black BC connector Pin 11 to gong connector Pin 2).

If wire OK., check gong and repair if necessary.

Note on gong signals:
Gong T1 is used for MEMORY signal (hour reminder), gong T2 for temperature warning (ice on road), gong T1 coupled with T2 for LIMIT and CODE warnings.