Siren Installation

1. Open engine compartment hood.





2. See Figure 5A. Siren with mounting bracket is to be mounted in forward right (passenger) side of engine compartment on metal cross brace above headlights.

3. See Figure 5A. Locate and remove the far right wire harness support clip from the metal cross brace.

4. Use clip hole in the Metal cross brace to locate and mount the siren with mounting bracket. Use M6 x 15 bolt, lock washer and nut (supplied in kit).

5. Connect siren wire harness to prewired vehicle harness/connector.

Note:
This siren wire harness/connector is routed out of the wire harness that provides the wiring to the right side headlights. Follow wiring from headlights back to wire harness and then follow right side wire harness to siren plug. If the vehicle is equipped with an onboard computer/horn remove electrical plug from OBC horn and reroute it and connect it to siren, OBC horn can be accessed from right side fog light housing cavity.

6. Carefully tie wrap and secure all wire harnesses.