Procedure 6

Recode ZAE control module; *1994 Models only.*

Use only MoDiC Coding Diskette VI 1.2 to modify the deployment time of the ZAE control module using usual coding procedure. The new information is transmitted through # 19 Airbag in the recoding section.

Note:
Ignition may not be turned off during recoding!

Load MoDIC with coding discs A and B.

- Connect MoDIC to vehicle's diagnostic connector.

- Turn on ignition.

- Select "Coding ZCS."

- Enter current date.

- Select "4 Series E36."

- Select "1 Recoding."

- Select "19 Airbag" and confirm - press "enter."

- Start automatic coding - press "Y."

- After recoding is complete (approx. 10 min.), turn ignition off. Wait at least 10 seconds, then turn ignition on again.

- Turn ignition off and disconnect MoDiC.