Crash and Alarm Sensor (CAG)

Defect Code Table:

Failure of low beam light -> Defect code 01
Defect Code 01
Failure of high beam light (USA) -> Defect code 01
Defect Code 01
Failure of hazard warning system -> Defect code 02
Defect Code 02
Visual alarm is not triggered with DWA active (not CH, Denmark version)-> Defect code 03
Defect Code 03
Low beam light or high beam light is not activated in push-pull system with respect to the flasher pulses in the event of alarm -> Defect code 04
Defect Code 04
The hazard warning system is not switched on in the event of a crash -> Defect code 05
Defect Code 05