Defect Code 7

Defect Code 7:

*D* Defect code memory: 7 Inclination monitor:

Explanation: The inclination monitor sends a faulty or no acknowledgment signal to the DWA control unit when arming the DWA system.

Possible cause: Wire from inclination monitor to the DWA control unit detective; inclination monitor detective.

Troubleshooting: Check inclination monitor control line from white 26-pin DWA control unit connector Pin 9 to inclination monitor and repair if necessary. It defect is not rectified, check signal line from inclination monitor to white 26-pin DWA control unit connector Pin 8 and repair if necessary. It detect is not rectified renew inclination monitor.