Defect Code 41

Defect Code 41:

*D* Defect code memory: 41 Acceleration Signal Rear Axle (Vertical):

Troubleshooting: Check wire and repair if necessary: From EDC relay connector X18068 to acceleration sensor.

If wire OK., measure voltage at the EDC relay: Is a voltage of 12 V applied?

If yes, check acceleration sensor and renew if necessary: (For check, please refer to defect code 30).

If no, check wire from EDC relay to fuse 45 and repair if necessary.

If defect has still not been rectified, renew EDC relay.