Computers and Control Systems: Technical Service Bulletins

• Recalls
  • Recall - Emissions in Excess of Allowable Standards
    • Overview
    • Procedure
• Customer Interest
  • DME - MIL ON/DTC's 201/203/Driveability Concerns
  • Engine - MIL ON/Codes Set/Tapping/Rattling Noise
  • ECM - EPROM Programming Updated
    • Overview
    • Situation
    • Affected Vehicles
    • Correction
    • Aftermarket Eproms
    • Parts Information
    • Service Action Label Instructions
    • Warranty Information
      • Overview
      • Affected Vehicles In Dealer Inventory Without Ews II
        • Prior to 1/95 Production
        • (Retail & Demo) Prior to 1/95 Production
        • Prior to 1/95 Prod. Which Requires Repl. of Control Module
        • (Retail & Demo) Prior to 1/95 Production (Same As Above)
      • Affected Vehicles In Dealer Inventory With Ews II
        • (1/95 - 2/95)
        • (Retail & Demo) (1/95 - 2/95)
  • Differential - Final Drive Oil Leaks
  • Engine - Rough Idle During Warm-up Phase
    • Overview
    • General Information
    • Engine Control Module EPROM Replacement
  • Instrument Cluster/EKM - Coding Problems
• By Symptom
  • Customer Interest
    • DME - MIL ON/DTC's 201/203/Driveability Concerns
    • Engine - MIL ON/Codes Set/Tapping/Rattling Noise
    • ECM - EPROM Programming Updated
      • Overview
      • Situation
      • Affected Vehicles
      • Correction
      • Aftermarket Eproms
      • Parts Information
      • Service Action Label Instructions
      • Warranty Information
        • Overview
        • Affected Vehicles In Dealer Inventory Without Ews II
          • Prior to 1/95 Production
          • (Retail & Demo) Prior to 1/95 Production
          • Prior to 1/95 Prod. Which Requires Repl. of Control Module
          • (Retail & Demo) Prior to 1/95 Production (Same As Above)
        • Affected Vehicles In Dealer Inventory With Ews II
          • (1/95 - 2/95)
          • (Retail & Demo) (1/95 - 2/95)
    • Differential - Final Drive Oil Leaks
    • Engine - Rough Idle During Warm-up Phase
      • Overview
      • General Information
      • Engine Control Module EPROM Replacement
    • Instrument Cluster/EKM - Coding Problems
  • Driveability
    • DME - MIL ON/DTC's 201/203/Driveability Concerns
  • False instrument warning light/gauges
    • DME - MIL ON/DTC's 201/203/Driveability Concerns
  • Noise
    • Engine - MIL ON/Codes Set/Tapping/Rattling Noise
  • Recalls
    • Recall - Emissions in Excess of Allowable Standards
      • Overview
      • Procedure
• All Technical Service Bulletins
  • Computers, Controls - Programming VS Veh. Data Status
  • Compuetrs/Controls - Recommended Diagnostic Procedures
  • Computers - ISTA Diagnosis On Vehicles Prior To E46
  • Computers/Control - Loading/Activation Of Enabling Codes
  • Progman(R) - Programming/Coding/Individualization
    • Overview
    • General_Rules_For_Programming
    • Procedure_A_Module_Replacement
    • Procedure_B_Software_Update
    • Procedure_C_Troubleshooting
      • Index
      • Introduction
      • Section I: Preparing A Progman Session
      • Section II: Progman Session Initialization
      • Section III: Before Programming/Coding
      • Section IV: After Programming Coding
      • Illustrations and Table
    • Procedure_E_Coding
  • DME - MIL ON/DTC's 201/203/Driveability Concerns
  • M60 Engine Test - Access in DIS
  • Computers/Controls - Custom Configuration
  • Updated MoDic(R) Diagnostic Software - D12.0
  • Updated MoDic(R) Software - P11.0 Programming
    • Overview
    • Program Highlights
    • Flash Programming Features
    • Programming the Control Module
      • Overview
      • 1. Determine Customer Service Measures
      • 2. Exchange Control Module
      • 3. Exchange EPROM
      • 4. Adjustment EWS - DME Vehicles From 1/95
      • 5. Clear Adaptation Values
    • Diskette Contents
    • How to Load V11.0 Software With MODIC Station
    • Label Printing
    • Prerequisites For Programming
    • Parts Information
  • ELO Diagnostic Cable - New Special Tool
  • Special Tools - Electrical Connector Release Tools
  • Engine - MIL ON/Codes Set/Tapping/Rattling Noise
  • ECM - EPROM Replacement/Application Chart
  • Undefined MoDic(R) Software
    • Overview
    • How to Load C7.0 Software With the MODIC Station
  • Updated MoDic(R) Software - P8.0 Programming
    • Overview
    • Engine Control Module Flash Programming Features
    • Programming the Control Module
      • Overview
      • 2. "Exchange Control Module"
      • 3. "Exchange EPROM"
      • 4. "Adjustment EWS - DME Vehicles From 1/95"
      • 5. "Clear Adaptation Values"
    • How to Load V8.0 Software With the Modic Station
    • Label Printing
    • Prerequisites For Programming
  • Updated MoDic(R) Software - C9.0 ZCS Coding
    • Overview
    • How to Load C9.0 Software With the MODIC Station
    • Label Printing
  • Updated MoDic(R) Software - P9.0 Programming
    • Overview
    • Flash Programming Features
    • Programming the Control Module
      • Overview
      • 1. "Determine Customer Service Measures"
      • 2. "Exchange Control Module"
      • 3. "Exchange EPROM"
      • 4. "Adjustment EWS - DME Vehicles From 1/95
      • 5. "Clear Adaptation Values"
    • How to Load V9.0 Software With the MODIC Station
    • Label Printing
    • Prerequisites For Programming
  • TIS - Software Update 12/96
    • Overview
    • TIS Loading Instructions For DIS Tester
    • TIS Loading Instructions For EPC/TIS Server
    • Proper Care of CDs
      • Overview
      • CD Return Procedure
  • New Special Tool - MoDic(R) Replacement Cable
  • ECM - EPROM Programming Updated
    • Overview
    • Situation
    • Affected Vehicles
    • Correction
    • Aftermarket Eproms
    • Parts Information
    • Service Action Label Instructions
    • Warranty Information
      • Overview
      • Affected Vehicles In Dealer Inventory Without Ews II
        • Prior to 1/95 Production
        • (Retail & Demo) Prior to 1/95 Production
        • Prior to 1/95 Prod. Which Requires Repl. of Control Module
        • (Retail & Demo) Prior to 1/95 Production (Same As Above)
      • Affected Vehicles In Dealer Inventory With Ews II
        • (1/95 - 2/95)
        • (Retail & Demo) (1/95 - 2/95)
  • Differential - Final Drive Oil Leaks
  • Emissions - On-Board Diagnostic Code Updated List
  • ECM and EPROM - Replacement/Programming
    • Overview
    • Procedure
      • Overview
      • A. Explanation of the Determination Process
      • B. M60 DME EPROM Replace./Program. Troubleshooting Procedure
      • C. Programming Hints
      • D. Exchange EPROM
      • E. Determination and Programming of Repl. Control Module
  • ECM - EPROM Replacement
    • Overview
    • A. Preparatory EPROM Replacement Instructions
    • B. EPROM Replacement For M50 (Non-Vanos) and M60
    • C. EPROM Replacement For M50 (Vanos) and M42
  • Engine - Rough Idle During Warm-up Phase
    • Overview
    • General Information
    • Engine Control Module EPROM Replacement
  • EPROM - Replacement/Application Chart Order Form
  • Special Tools - Simulator Tool For Bosch Oxygen Sensors
    • Overview
    • Individual Parts of the Simulator
    • Operator Control/ Panel of Simulator
    • Connecting the Simulator
    • Test 1: Oxygen Sensor Testing
    • Test 2: Oxygen Sensor Voltage
    • Test 3: Simulation of Probe Voltage
  • Recall - Emissions in Excess of Allowable Standards
    • Overview
    • Procedure
  • Tools - Seal Pliers For Speedometer Sender
  • Instrument Cluster/EKM - Coding Problems