B. M60 DME EPROM Replace./Program. Troubleshooting Procedure

1) If the following chassis numbers are displayed on the MoDiC screen during the "Automatic" determination phase, follow the steps indicated:





2) If the following statement is displayed on the MoDiC screen during the "Automatic" determination phase, follow the steps indicated:





3) If the following statement is displayed on the MoDiC screen during the "Manual" determination phase, after a part number has been entered follow the steps indicated:





4) If the following statement is displayed on the MoDiC screen after a replacement EPROM has been installed and programming was selected, follow the steps indicated: