Code 52 (Fresh Air Flap Motor)

^D^ Defect code memory: 52 Fresh air flap motor

Explanation:
This defect code is stored when there is a short to positive or a break at green connector Pin 6, 7, 8 or 9.

Effect of defect:
If the defect is a current defect, the component is no longer activated.

Possible cause:
Voltage supply (approximately 12V) not OK, wire or fresh air flap motor defective.

Troubleshooting:
Check voltage supply (approximately 12V) as well as wires and repair or renew component as required.