Code 55 (Recirculated Air Flap Motor)

^D^ Defect code memory: 55 Recirculated air flap motor

Explanation:
This defect code is stored when there is a short to positive or a break at white connector Pin 14, 15, 16 or 17.

Effect of defect:
If the defect is a current defect, the component is no longer activated.

Possible cause:
Voltage supply (approximately 12V) not OK, wire or recirculated air flap motor defective.

Troubleshooting:
Check voltage supply (approximately 12V) as well as wires and repair or renew component as required.