Code 67 (Rear Area Flap Motor)

^D^ Defect code memory: 67 Rear Area Flap Motor

Explanation:
This defect code is stored when there is a short to positive or a break at white connector Pin 1, 2, 3 or 4.

Effect of defect:
If the defect is a current defect, the component is no longer activated.

Possible cause:
Voltage supply (approximately 12V) not OK, wire or rear area flap motor defective.

Troubleshooting:
Check voltage supply (approximately 12V) as well as wires and repair or renew component as required.