Defect Code 11

Defect Code 11:

Malfunction: Status LED:

Effect of defect: Defect during arming/disarming the DWA.

Troubleshooting: Check whether DWA is operable:

Check fuse No.17 and DWA unit fuse (15 A, directly on control unit).

If fuses OK., check all connections on the DWA control unit (loose contacts, bent pins etc.).

If connections OK., check wire from DWA control unit connector X 252 Pin 8 to LED connector X 514 Pin 4 and repair if necessary.

If defect still Not rectified, check wire from LED connector X 415 Pin 1 to terminal 30 (fuse 31).

If defect Not rectified, check LED and replace if necessary.