Defect Code 6

Defect Code 6:

Malfunction: Front lid contact:

Effect of defect: Screen display, closing/opening of front lid Not detected. Troubleshooting: Check wire and repair if necessary:

From DWA control unit connector X 252 Pin 20 to front lid contact connector X 371 Pin 2 and further from X 371 Pin 1 to ground.

If defect is Not rectified, check wire from connector X 267 to EKM and repair if necessary.

If wire OK, status monitoring of front lid contact (closed/open) as displayed on screen.

If necessary replace defective front lid contact.