Defect Code 2

Defect Code 2:

Malfunction: Auxiliary module (Installed?):

Troubleshooting: It auxiliary module OK, check wire and repair if necessary: From DWA control unit connector X 252 Pin 4 to auxiliary module connector X 301 Pin 15 and from X 301 Pin 14 to connector X 894 (terminal 30) and further to the DWA control unit connector X 335 Pin 2. It defect Not rectified, check ground wire and repair if necessary:

From auxiliary module connector X 301 Pin 1 and 13 to ground. In case of faults in the window monitoring function, check following wires and repair if necessary:

- Driver's window: From auxiliary module connector X 301 Pin 12 to connector X 936 Pin 2 and further from X 936 Pin 1 to ground.
- Passenger's window: From auxiliary module connector X 301 Pin 25 to connector X 937 Pin 2 and further from X 937 Pin 1 to ground.
- Rear left window: From auxiliary module connector X 301 Pin 11 to connector X 1204 Pin 2 and further from X 1204 Pin 1 to ground.
- Rear right window: From auxiliary module connector X 301 Pin 24 to connector X 1205 Pin 2 and further from X 1205 Pin 1 to ground.
- Rear window (rearscreen): From auxiliary module connector X 301 Pin 26 via connector to rear window.

Pin assignments at auxiliary module connector X 301:

Pin 1: Ground wire
Pin 2: Control wire from DWA control unit to auxiliary module for arm/disarm commands
Pin3-10: Not used
Pin 11: Plug connector, rear left window monitoring
Pin 12 : Plug connector, front left window monitoring
Pin 13 : Ground wire (~)
Pin 14 : Terminal 30 connection at DWA control unit X 335 Pin 2
Pin 15 : Signal wire auxiliary module to DWA control unit
Pin 16-23: Not used
Pin 24 : Plug connector, rear right window monitoring
Pin 25 : Plug connector, front right window monitoring
Pin 26 : Rear window (rearscreen) monitoring