Defect Code 15
Defect Code 15:
Defect symptom:
MSR mode although handbrake is applied
Possible causes:
Handbrake switch defective
Short or break on the wire to the hand brake switch or from the handbrake switch to the ABS/ASC control unit or to the instrument cluster
Troubleshooting:
Switch on ignition
Measure voltage at ABS/ASC control unit Pin 3 and Pin 52; nominal value: approx. 12 V;
Nominal value not OK:
Check wire to instrument cluster and indicator lamp and repair or replace as necessary
Nominal value OK:
Apply handbrake and measure voltage once again: nominal value < 0.5 V:
Check handbrake switch, wire and ground connection and repair or renew as required