Defect Code 47

Defect Code 47:

Malfunction: Failure of All Seat Adjustment Functions:

Possible cause: Relay, adjustment switch

Note: Mirror adjustment must be OK otherwise see defect code 46.

Troubleshooting: Does the relay monitoring function indicate that the relay/seat motors are OK. (diagnostic program)? If yes, renew control unit; if no, check buttons as displayed on screen; are all switch positions detected (note: Switch must be held pressed for at least 5 5)? If yes, go to defect code 49; if no, remove seat adjustment switch and check switch, renew if necessary: The resistance at connector X 603 between Pin 5 and the Pins 1, 2, 3, 4, 8, 9,10,11,12 (depending on switch position) must always be less than 1 Ohm. If switch OK, check wire from adjustment switch connector X 603 Pin 5 to connector X 602 Pin 15 and repair if necessary. If wires OK, check all wires from adjustment switch to connector X 602 and renew if necessary.