Defect Code 20

Defect Code 20:

*D* Defect code memory: 20 Road speed signal:

Explanation: This defect code is stored when the speed signal received

by the control unit is faulty.

Possible causes: Wire from rear axle contact to EKM damaged, wire from EKM to EDC control unit damaged.

Troubleshooting: Check wire and repair if necessary. From connector X 945 Pin 13 to EKM. If defect is not rectified, check rear axle contact and renew if
necessary.

If defect is still not rectified, check speed-A signal: Simulation in diagnostic program EKM.