Windshield Wiper Motor Without ADV

Windshield wiper motor, removal and installation

The procedure given here applies to cars without the wiper force contact system (ADV). Slight differences apply on cars with ADV.


1. Remove wiper console. Refer to Wiper Module Removal. Windshield Wiper Motor With ADV
2. Mark position of wiper linkage crank to wiper motor shaft. Remove linkage crank from motor.






3. Unscrew bolts and remove motor from linkage console.






4. When installing a new motor, connect motor and operate wiper switch briefly so that motor stops in park position. Align wiper arm crank in straight line with linkage.