Rear Lid Adjustment

Remove front and rear roof liner frames. See Sunroof/Moonroof Interior Trim Panel.

Ideal Adjustment:





Equal distance (A) of lid to front lid and rear edge of roof.

Height:
Front: flush to 1.5 mm deeper.
Rear: flush to 1.5 mm higher.





Loosen screws.

Installation:
Tightening torque 5 Nm.





Loosen all four nuts (2) and push the four adjusting wedges (1) in or out far enough to reach the ideal adjustment.

Installation:
Tightening torque = 5 Nm.

Install front and rear roof liner frames.