Programming and Relearning

INITIALIZING DUAL LID SUN ROOF (Touring)

Initialization must be carried out after emergency (manual) operation, completion of sun roof repairs or interruption of power supply.

Initialization is carried out in absolute zero position (both lids against the mech. final stops).

Caution! Danger of squeezing hands! Squeeze protection is not activated during initialization.

Tip-operation is not possible during initialization.





Operating Symbols:

(A) Tipped briefly.
(B) Pressed continuously.
(C) Movement of lids.
(D) Sequence of (A) and (8).





Close the sun roof completely. Remain in closing position approx. 20 seconds after both lids and the roof liner frame are closed; initialization is then carried out.