Removing Piston For Chain Tensioner

INSTALLING AND REMOVING / REPLACING PISTON FOR CHAIN TENSIONER




- Remove upper section of suction filter housing style with mass air flow sensor.
- Remove lower section of suction filter housing.




- Unfasten screw connection.

Installation Note: Replace sealing ring, torque to 45 ± 3 Nm (32 ± 2 ft lb).




- Remove screw connection and piston for chain tensioner.




Arrangement of Components:
(1) Screw plug
(2) Sealing ring
(3) Sleeve
(4) Recoil spring
(5) Hydraulic piston
Tapered end of recoil spring (4) faces hydraulic piston (5).





Installation Note: To simplify assembly, drain oil chamber between sleeve and hydraulic piston.