Operation CHARM: Car repair manuals for everyone.

Removal and Replacement



51 11 000 Removing And Installing Complete Front Bumper

NOTE: Open hood.







Unfasten left/ right screws and lift out wheel arch finishers (1) from side.







Unfasten screws from impact absorber.

Installation:
2AZ Bumper and bracket to impact absorber
M10 41 Nm







Press detent lugs upwards and pull bumper forwards slightly.

Park Distance Control:
If necessary pull bumper forwards slightly and remove connector on ultrasonic converter.







Pull bumper slightly forwards and remove connector (1) from left/ right foglight.
Headlight cleaning system:
If necessary pull bumper forwards slightly.
Remove lock (2), pull off hose (3) and push upwards or seal.







Pull bumper forwards with 2nd person.







Installation:
The height of the bumper is adjusted by twisting the socket head cap screws.