Defect Code 60

Defect Code 60:

General troubleshooting when individual functions are defective.:

Troubleshooting:

- *D* select defect code memory: Is a defect code stored?

- *D* select test procedure: By paging with *<-* or *->*, select the sensor to be tested. Perform testing in accordance with the instructions given on the display screen.

- *D* activate components: A defective output can be checked by way of activation.

- If a defect is determined in the area of the sensors but no defect can be found on the sensor or on the corresponding wire perform *D* system test before renewing the EKM. The EKM should only be renewed when the corresponding input is found to be faulty during the test