Models With ABS

Procedure
1. Bleeding rear wheel brakes, refer to Standard Bleeding Procedures.
- Carry out bleeding routine only after opening ABS hydraulic system.
2. Press down and hold down brake pedal.
3. Connect bleeder hose with bottle on bleeder valve
- Open bleeder valve on wheel brake, beginning at right rear.
4. Release and operate brake pedal as far as stop about 10 times.
- If escaping brake fluid is free of air bubbles, hold down brake pedal, close bleeder valve.
- Release brake pedal.
5. Repeat procedure described in Points 2 to 4 at back left.
6. Repeat procedure described in Points 2 to 4 at front right.
7. Repeat procedure described in Points 2 to 4 at front left.