Front

Removing and installing or replacing push rod (support) for stabilizer





Stabilizer connection on spring strut:
Remove nuts.

Installation note:
Use washer (2). Replace self-locking nut.
Key surface (1) on ball pin must be parallel to damper axis.
Tightening torque, refer to Specifications.





Unfasten nut and remove push rod.

Installation note:
Key surface (1) on ball pin must run parallel to damper axis.
Replace self-locking nut. Tightening torque, refer to Specifications.





Stabilizer connection on control arm:
Unscrew nuts (1).

Installation note:
Replace self-locking nut (1). Fit shim (2).
Tightening torque, refer to Specifications.