Defect Code 11

Defect Code 11:

Defect symptom:

The multifunction lamp remains on after ignition on and engine start.

Flash code readout is not possible.

Possible causes:

Short to ground on the wire from the ABS/ASC control unit Pin 51 to the instrument cluster

Malfunction in the ABS/AS C control unit

Troubleshooting:

Switch off ignition and disconnect the ABS/ASC control unit. Switch on ignition.

ASC multi-function lamp lights:

Check wire from ABS/ASC control unit Pin 51 to instrument cluster for a short and repair wire.

ASC multi-function lamp does not light:

Replace ABS/ASC control unit.