Operation CHARM: Car repair manuals for everyone.

Defect Code 10



Defect Code 10:

*D* Defect code memory: 10 Signal steering column switch, adjustment direction inclination down:

Possible cause: Input of steering column switch signal active for longer than 24 seconds.

Effect of defect: The corresponding signal is ignored for the time the defect code is set.

Troubleshooting: Check wire and repair if necessary: From steering column switch S 119 connector X 18093 Pin 5 to control unit connector X 18099 Pin 9; if wire is OK, check steering column switch and renew if necessary. Also check the ground wire from the control unit to the steering column switch and repair if necessary; From steering column switch S 119, connector X 18093 Pin 3 to control unit connector X 18099 Pin 12.