Right Side

- Switch off ignition.




- Loosen retainers (1).
- Unfasten hose clip (2).
- Disconnect plug-in connection (3).
- Remove upper section of intake filter housing.




- Unfasten screw. Remove lower section of suction filter housing.




Installation Note: To ensure screw head does not twist away when screwing down the hose clip (1), it must be tightened up to stop (2).




Installation Note: Release hose clamp (1), withdraw hose.




Installation Note: Fit hose (1) and clip (2) to neck in wheel arch.




Installation Note: Slide lower section of intake filter housing onto hose (1). Tighten down hose clip.