Programming the Control Module: Overview

The menu for V7.0 has 4 options. They are as follows:

1. "Determine Customer Service Measures"

This step is for special program modifications only. When activated, the program will automatically determine whether the vehicle it is connected to is eligible for any current modification. If it is, it will display which ones and you may start the modification with the press of the "Y" button. If the vehicle is not eligible, the program will display "No Programming Data Available for this SG Version".

Note:
Please disregard any Service Campaign numbers that may be displayed in the software. The control module may only be updated one (1) time.

The modifications contained in V7.0 are as follows:

^ Cold start DME 3.1 M50 with VANOS
^ Cold start DME 3.3.1 M50 non VANOS
^ Fault code 41 DME 3.3.1 E36 M3
^ M60 EPROM replacement DME 3.3