Defect Code 92
Defect code: 92, Terminal 50 On for more than 3 min.Explanation: This defect code is stored when the signal terminal 50 is detected at connector, black Pin 1 for longer than 3 minutes.
Effect of defect: When terminal 50 ON is detected, the A/C compressor/ auxiliary fan stage 1, rear window defogger and the stepping motors are switched off. Self diagnosis is also not performed.
The control unit assumes terminal 50 OFF after the defect has been detected.
Possible cause: Wire defective.
Troubleshooting: Check wire and repair if necessary.