Removal and Installation

Refer to Service Precautions. Vehicle Damage Warnings

- Read fault memory.
- Disconnect battery ground wire.




- Remove air cleaner upper section with air-flow sensor.




- Remove alternator drive belt.
With hydraulic drive belt tensioner:
- Remove guide pulley.





Installation
- Fit screw in thread (1) of upper reversing roller.





With mechanical drive belt tensioner
Unfasten screw (1) in upper reversing roller.




Installation:
- Fit screw in thread (2) of upper reversing roller (1). Thread (3) remains exposed.




- Unfasten screw connection at top and bottom of alternator.




Installation:
- To facilitate assembly, push press-mounted bushes (1) on engine carrier into position (2).




- Remove cover cap.
- Unfasten screws.


NOTE: Dismantle alternator.