Technical Specifications

Case and Cover Specifications
Temperature For Installation Of Bearings 80°C

Transmission Shafts
Axial Play (Axial Bearing Clearance) Of:
Output Shaft 0 - 0.09 mm
Input Shaft 0.04 mm
Output Spigot:
Radial Runout 0.07 mm
Output Flange:
Radial Runout 0.07 mm
Axial Runout 0.10 mm

Gears (Layshaft)
Pressing Off And Pressing On Forces:
5th Gear 50 - 70 kN

Synchronization Guide Sleeves
Pressing Off And Pressing On Forces:
5th Gear 50 - 70 kN

Synchronizations
Distance Between Synchronizer Ring And Clutch Body:
New condition:
1st/2nd Gear 1.30 - 2.10 mm
3rd Gear 1.10 - 1.50 mm
4th/5th Gear 0.90 - 1.50 mm
Max. wear limit size 0.80 mm
Reverse gear:
New condition 1.10 - 1.70 mm
Max. wear limit size 0.50 mm