Computers and Control Systems: Technical Service Bulletins

• Recalls
  • Campaign - Multiple DTC's Due to ECM Software Error
  • Campaign - Reprogramming ECM, O2 Sensor Trouble Codes
• Customer Interest
  • SRS - Air Bag Lamp ON/Multiple Fault Codes Set
    • Overview
    • Attachments
      • E36
      • E38 and E39
      • E46
      • E53
      • Z3
  • Fuel System - MIL ON, Tank Leakage Fault Codes
  • ECM - Increase Idle Speed by Reprogramming DME (M5.2)
  • Engine - MIL ON/Codes Set/Tapping/Rattling Noise
  • Central Locking System - Erroneous Fault Code 86
  • Engine Controls - Check Engine Lamp/Misfire Faults
  • Brakes - ASC MIL ON No Codes Set
  • Instruments - `Check Engine Oil' Light ON Erroneously
• By Symptom
  • Customer Interest
    • SRS - Air Bag Lamp ON/Multiple Fault Codes Set
      • Overview
      • Attachments
        • E36
        • E38 and E39
        • E46
        • E53
        • Z3
    • Fuel System - MIL ON, Tank Leakage Fault Codes
    • ECM - Increase Idle Speed by Reprogramming DME (M5.2)
    • Engine - MIL ON/Codes Set/Tapping/Rattling Noise
    • Central Locking System - Erroneous Fault Code 86
    • Engine Controls - Check Engine Lamp/Misfire Faults
    • Brakes - ASC MIL ON No Codes Set
    • Instruments - `Check Engine Oil' Light ON Erroneously
  • Erratic Operation
    • Engine Controls - Check Engine Lamp/Misfire Faults
  • False instrument warning light/gauges
    • Central Locking System - Erroneous Fault Code 86
    • Engine Controls - Check Engine Lamp/Misfire Faults
    • Instruments - `Check Engine Oil' Light ON Erroneously
  • Noise
    • Engine - MIL ON/Codes Set/Tapping/Rattling Noise
  • Recalls
    • Campaign - Multiple DTC's Due to ECM Software Error
    • Campaign - Reprogramming ECM, O2 Sensor Trouble Codes
  • Starting problems
    • Engine Cranks, But Does Not Start, Fault Codes Set
  • Sticking/Binding
    • Central Locking System - Erroneous Fault Code 86
• All Technical Service Bulletins
  • Computer/Controls - Replacement DME Programming
  • Computers, Controls - Programming VS Veh. Data Status
  • Compuetrs/Controls - Recommended Diagnostic Procedures
  • Computers - ISTA Diagnosis On Vehicles Prior To E46
  • Computers/Control - Loading/Activation Of Enabling Codes
  • Computers/Controls - ISTA Test Plan Priority Error Info.
  • Computers/Controls - ISTA/D DTC S0001 After Quick Delete
  • Progman(R) - Programming/Coding/Individualization
    • Overview
    • General_Rules_For_Programming
    • Procedure_A_Module_Replacement
    • Procedure_B_Software_Update
    • Procedure_C_Troubleshooting
      • Index
      • Introduction
      • Section I: Preparing A Progman Session
      • Section II: Progman Session Initialization
      • Section III: Before Programming/Coding
      • Section IV: After Programming Coding
      • Illustrations and Table
    • Procedure_E_Coding
  • Engine Controls - Updated DISplus/GT1 Software
  • Computers/Controls - 'Retrofit' Update Programming
  • Engine Controls - Various Driveability Complaints
  • SRS - Air Bag Lamp ON/Multiple Fault Codes Set
    • Overview
    • Attachments
      • E36
      • E38 and E39
      • E46
      • E53
      • Z3
  • Engine Controls - Progman(R) V22.1/V22.1.1 and V22.1.2
  • Computers/Controls - Progman(R) V22.0/V22.0.1 Errors
  • Engine Controls - Progman(R) V21.01 and V21.02.01 Errors
  • Engine Controls - Progman(R) V21.0 Software Errors
  • Engine Controls/Emissions - OBD Readiness Code Setting
  • Catalytic Converter - Unnecessary Replacements
  • Engine - M52 Description/Features
    • Overview
    • Situation:
    • Technical Data
  • Evap. Emission Control - Fuel Filler Cap/Door Labels
  • Fuel System - MIL ON, Tank Leakage Fault Codes
  • Computers/Controls - Custom Configuration
  • Updated MoDic(R) Diagnostic Software - D12.0
  • Updated MoDic(R) Software - P11.0 Programming
    • Overview
    • Program Highlights
    • Flash Programming Features
    • Programming the Control Module
      • Overview
      • 1. Determine Customer Service Measures
      • 2. Exchange Control Module
      • 3. Exchange EPROM
      • 4. Adjustment EWS - DME Vehicles From 1/95
      • 5. Clear Adaptation Values
    • Diskette Contents
    • How to Load V11.0 Software With MODIC Station
    • Label Printing
    • Prerequisites For Programming
    • Parts Information
  • Special Tool - 134 Pin Break Out Box
  • Special Tools - Electrical Connector Release Tools
  • Special Tools - DSCIII Test Cable
  • Engine Controls - OBD II Training And Manual
  • ECM - Increase Idle Speed by Reprogramming DME (M5.2)
  • Engine - MIL ON/Codes Set/Tapping/Rattling Noise
  • Engine Controls - Unable to Diagnose Using DIS Tester
  • Engine Cranks, But Does Not Start, Fault Codes Set
  • Intake Air System - DTC's 27 and 35 Set/MIL ON
  • Special Tools - ZAE/MRS Test Cable
  • Central Locking System - Erroneous Fault Code 86
  • ECM - Programming/Replacing FLASH Control Modules
    • Overview
    • A. Explanation of the Determination Process
    • B. "Flash" Programming Troubleshooting Procedure
    • C. Programming Hints
    • D. Programming of Engine Control Module
  • Undefined MoDic(R) Software
    • Overview
    • How to Load C7.0 Software With the MODIC Station
  • Updated MoDic(R) Software - P8.0 Programming
    • Overview
    • Engine Control Module Flash Programming Features
    • Programming the Control Module
      • Overview
      • 2. "Exchange Control Module"
      • 3. "Exchange EPROM"
      • 4. "Adjustment EWS - DME Vehicles From 1/95"
      • 5. "Clear Adaptation Values"
    • How to Load V8.0 Software With the Modic Station
    • Label Printing
    • Prerequisites For Programming
  • Updated MoDic(R) Software - C9.0 ZCS Coding
    • Overview
    • How to Load C9.0 Software With the MODIC Station
    • Label Printing
  • Updated MoDic(R) Software - P9.0 Programming
    • Overview
    • Flash Programming Features
    • Programming the Control Module
      • Overview
      • 1. "Determine Customer Service Measures"
      • 2. "Exchange Control Module"
      • 3. "Exchange EPROM"
      • 4. "Adjustment EWS - DME Vehicles From 1/95
      • 5. "Clear Adaptation Values"
    • How to Load V9.0 Software With the MODIC Station
    • Label Printing
    • Prerequisites For Programming
  • TIS - Software Update 12/96
    • Overview
    • TIS Loading Instructions For DIS Tester
    • TIS Loading Instructions For EPC/TIS Server
    • Proper Care of CDs
      • Overview
      • CD Return Procedure
  • Warranty - Quality Monitoring Camshaft Sensor
    • Overview
    • Quality Assurance Work Form
  • ECM and EPROM - Replacement/Programming
    • Overview
    • Procedure
      • Overview
      • A. Explanation of the Determination Process
      • B. M60 DME EPROM Replace./Program. Troubleshooting Procedure
      • C. Programming Hints
      • D. Exchange EPROM
      • E. Determination and Programming of Repl. Control Module
  • Engine Control Modules - Programming Hints
    • Overview
    • Correction
  • ECM - Programming Not Possible With CD 18
  • Campaign - Multiple DTC's Due to ECM Software Error
  • ECM - Reprogramming W/P16.0 Version Software
  • Engine Control Module - MS 43 Removal Precautions
  • Engine Controls - Check Engine Lamp/Misfire Faults
  • Campaign - Reprogramming ECM, O2 Sensor Trouble Codes
  • Engine Controls - Idle Speed Too Low, Update ECM
  • Brakes - ASC MIL ON No Codes Set
  • Check Engine Lamp ON/DTC's Stored
  • Tools - A/T Position Switch Gauge
  • Instruments - `Check Engine Oil' Light ON Erroneously