Rear Suspension
| General Ride Level Height Height setting (lower edge of wheel house on rim flange wheel center) for normal position. | Deviation From Nominal Value for all Wheels Together | 10 | |
| Series | 16" Rim | 569 +/- 10 mm | |
| 17" Rim | 584 +/- 10 mm | ||
| 18" Rim | 597 +/- 10 mm | ||
| General Track Width | Track Width for Normal Position and Press-in Depth | Offset 20 mm | 1568 mm |
| Offset 23 mm | 1562 mm | ||
| Wheel Bearings All | Max. Axial Wheel Bearing Play Double-row, angular ball bearing lubricated for service life and not to be disassembled. | 0.06 - 0.08 mm | |
| Control Arms and Struts | Trailing Arm on Rear Axle Carrier Tighten in normal position. | 67 Newton Meter (Nm) | |
| Traction Strut to Wheel Carrier Taper pin and socket must be free of grease. | 65 Newton Meter (Nm) | ||
| Traction Strut on Rear Axle Carrer Tighten in empty weight or normal position. | Toe-in Adjustment | 60 Newton Meter (Nm) | |
| Upper Control Arm to Wheel Carrier | 160 Newton Meter (Nm) | ||
| Top Control Arm on Rear Axle Carrier Tighten in empty weight or normal position. | 110 Newton Meter (Nm) | ||
| Compression Strut on Body | M8 8.8 | 21 Newton Meter (Nm) | |
| M8 10.9 | 30 Newton Meter (Nm) | ||
| Auxiliary Control Arm on Trailing Arm and Rear Axle Carrier Tighten in normal position. | M14 x 1.5 | 127 Newton Meter (Nm) | |
| Swinging Arm on Rear Axle Carrier (Rubber Mount) Tighten in empty weight or normal position. | Front | 60 Newton Meter (Nm) | |
| Rear | 130 Newton Meter (Nm) | ||
| Integral Link on Front Wheel Carrier Tighten in empty weight or normal position. | 105 Newton Meter (Nm) | ||
| Bolt Connection, Swinging Arm, Integral Link, Wheel Carrier Tighten in empty weight or normal position. | Camber Adjustment | 236 Newton Meter (Nm) | |
| Rear Axle Suspension | Rear Axle Carrier with Rubber Mounts to Body | 127 Newton Meter (Nm) | |
| Shock Absorbers | Shock Absorber on Trailing Arm/Wheel Carrier/Carrier Arm/Control Arm Tighten in empty weight position. | 127 Newton Meter (Nm) | |
| Shock Absorber Piston Rod on Thrust Bearing | M14 | 27 Newton Meter (Nm) | |
| M10 | 23 Newton Meter (Nm) | ||
| Support on Body/Rear Axle Carrier | M8 | 24 Newton Meter (Nm) | |
| Stabilizer Bar | Stabilizer Link on Anti-roll Bar/Swinging Arm | 42 Newton Meter (Nm) |