Adjusting Front Wheel Alignment (With KDS)

Adjusting Front Wheel Alignment (With KDS)

Caution! On vehicles with Electronic Damper Control / Dynamic Stability Control, "steering angle compensation" must be performed with the BMW Service Tester after every wheel alignment operation.

Adjust toe and toe-difference angle.





Move steering gear into straight-ahead setting (marks on housing and steering shaft).





Loosen clamping screws on track rods.
Set toe-in of left and right wheels to specified value, refer to Alignment Specifications, by turning steering tie rod.

Installation:
Ensure that the ball joints are not twisted.
Tightening Torque, refer to Steering Specifications.